Biketoworkday is supported by its audience. When you buy through our links, we may earn an affiliate commission. Learn more

How to Use a Joe Blow Bike Pump? – A Beginner’s Guide


Written by Gary Johnson / Fact checked by Henry Speciale

how to use a joe blow bike pump

Perhaps you have purchased a floor air pump and had this burning question in mind: how to use a joe blow bike pump?

Operating this signature pump model from Topeak bicycle is way easier than you think. For beginners, learning how this equipment works will only take you minutes.

With this guide, you can surely pump your bike anywhere you need to! Read here to check out the whole process.

Step-by-step Guide to Using a Joe Blow Bike Pump

You don’t need a lot of things to start wielding top peak pumps – just prepare the following equipment along with these instructions to guide you accordingly:

What to Prepare

  • Joe Blow Bicycle Pumps
  • Air Valve Needle

Step 1: Locate & Check Air Valve

joe-blow-max-hp-bike-pump

Remove the valve caps on the wheel to identify whether your bike has a Schrader or Presta valve. It will help you determine which head of the pump is suitable for the task.

Joe blow sport pump, Joe Blow max hp bike pump, & Joe Blow pro bike pump do not need an adapter due to their built-in twin head that features a connector to pump a Presta valve and Schrader.

Step 2: Pump Attachment

joe-blow-sport-pump

Joe blow bicycle pumps support both Presta and Schrader valves. The black end is the Schrader valve pump, and the gray one is the Presta counterpart. You’ll have to push them to fasten them onto the wheel’s valve.

For Schrader-equipped wheels, directly attach the adapter to the cylinder, then secure it by pushing the leveler toward the Presta side to activate its locking spring mechanism.

To pump a Presta valve, start by unscrewing the valve nut airlock apparatus by rotating it counterclockwise. Place the suitable adapter head on the valve and lock it by lowering the pump lever toward the Schrader side.

Step 3: Start pumping

Grab the handle of your Joe Blow air pump and pull it up. To inflate your tires, push down the handle firmly.

Repeat the procedure until you reach the recommended 80 to 130 PSI level; however, note that this may change depending on your tire. For instance, hybrid tires may only require around 40-70 PSI.

top-peak-pumps

A Topeak Joe Blow Sport III has an integrated air pressure module that will help you gauge when you should stop inflating your bike. Sadly, this feature is unavailable if you use a portable bike pump (or mini pump) from this same brand.

Step 4: Fasten the Caps

Now that you have successfully inflated your bike, you can finalize the process by disconnecting the pump nozzle from the bike tire’s valve head.

Then, put the dust cap back on the Schrader valve. For Presta models, remember to tighten the lock nut first before assembling the dust cover.

How to Operate a Joe Blow Bike Pump?

The Joe Blow series had grown its reputation as a reliable floor air pump with its outstanding benchmark ratings, gearing on durability and performance.

Like any other options in the market, you can operate this bike pump in a few easy steps:

  • Step 1: Find the air valves and identify the valve type utilized in your wheels.
  • Step 2: Open the dust cap and unlock the nut feature (for Presta valves) or the spring mechanism (for Schrader valves).
  • Step 3: Attach the appropriate part of the twin head that corresponds to the tire’s valve type. Secure so by adjusting the pump knob.
  • Step 4: Inflate the bike tire by pulling the handle up and firmly pushing it down. Continue until you get to the desired air pressure level.
  • Step 5: Detach the bike pump head and tightly close the air valve lid.

Joe Blow Bike Pump Not Working?

Even with considerably good consumer reviews, mishaps are inevitable to any product. For instance, some may find their Joe Blow Presta valve not working. In addition, there are also reports about the PSI level not changing.

It is advisable to seek professional advice when distinguishing the exact reason for such issues. However, there are various solutions that you can also try to remedy the problem:

A replacement head might be necessary if the air does not flow to the wheels. Replacement parts for Joe Blow bicycle pumps are available on their website.

Furthermore, I’d like to recommend you several related tips and tricks about pumping a bike. Click these links if you are interested: 

Conclusion

Knowing how to use a Joe Blow bike pump is advantageous for any bike enthusiast, especially for consumers planning to buy one.

Utilizing Joe Blow bicycle pumps are almost similar to any bike pump brand, but with guaranteed reliability based on its benchmark performance, besides the fact that integrated is every component needed for smooth tire inflation.

We hope that you found the answer you are looking for here. If so, feel free to share this article.

Thank you for reading!

5/5 - (3 votes)